POST HOLE DIGGER
|The model 300 post hole digger is designed to fit most 14 - 24 horsepower small tractors equipped with a category 0 three-point hitch or limited Cat 1 and a 540 rpm PTO. The model 300 post hole digger handles 6", 9", and 12" diameter standard duty 30" length augers.|
| The three position boom allows the unit to fit a variety of tractor models. A lever is provided for the operator to adjust the auger starting angle.
The gearbox has a 3:1 gear ratio and is protected by the shear-bolt PTO driveline. The gearbox features tapered roller bearings and spring loaded seals.
The model 300 digger is built for years of trouble-free work with a minimum amount of maintenance.
NOTE: Most tractors of this size have lift arms made of 7/8 inch diameter (Cat. 1) pins, but with the 20 inch Cat. 0 spacing.
Tractors with very short lift arms made for 5/8 inch diameter pins may not be suitable for digging post holes. (Special 5/8 inch diameter pins are available for those tractors that can handle the post hole digger.
Please read and follow all product safety instructions.